Monitoring The Coverslipping Operation; Coverslipping Operation Finished - Leica HistoCore SPECTRA CV Instructions For Use Manual

6.6.1 Monitoring the coverslipping operation

The user can retrieve and monitor details regarding the ongoing coverslipping operations using the
process status display
• Process status display with calculated remaining coverslipping time, real time at the end of processing,
coverslip line used, parameter set number
• The status bar
user status and icons indicating messages and warnings that occurred.
• The position of the rack is detected in the load and unload drawer using RFID.
Note
The last 20 active messages and warnings can be called up by touching the corresponding symbols
in the status bar
situations and to initiate any required actions.
6.6.2 Coverslipping operation finished
• If a rack ran the coverslipping operation, it will be transported in the unload drawer.
• The unload drawer can hold up to 9 racks. The racks are placed in the unload drawer in the sequence
shown from A1 to C9 (→ Fig. 75).
Fig. 75
HistoCore SPECTRA CV
(→ P. 42 – 5.3 Process status
(→ P. 41 – 5.2 Elements of the status display)
(→ Fig. 20-4) (→ Fig. 20-5). This allows the user to learn about past and current
Daily Instrument Setup
display):
(→ P. 42 – 5.3 Process status
with the date, time, "process" icon,
display).
A B C
3 6 9
2 5 8
1 4 7
6
97