Communication Settings For Rs-232C - Agilent Technologies 1260 Infinity VL User Manual

12
Hardware Information
Setting the 8-bit Configuration Switch (without On-board) LAN
The following tables represent the configuration switch settings for the modules without
N O T E
on-board LAN only.
Table 13
The LAN settings are done on the LAN Interface Card G1369B/C. Refer to the
N O T E
documentation provided with the card.

Communication Settings for RS-232C

The communication protocol used in the column compartment supports only
hardware handshake (CTS/RTR).
Switches 1 in down and 2 in up position define that the RS-232C parameters
will be changed. Once the change has been completed, the column instrument
must be powered up again in order to store the values in the non-volatile
memory.
Table 14
Use the following tables for selecting the setting which you want to use for
RS-232C communication. The number 0 means that the switch is down and 1
means that the switch is up.
186
8-bit Configuration Switch (without on-board LAN)
Mode Select 1
RS-232C 0
Reserved 1
TEST/BOOT 1
Communication Settings for RS-232C Communication (without on-board LAN)
Mode
1
Select
RS-232C 0
2 3 4
1 Baudrate
0
1 RSVD
2 3 4
1 Baudrate
5 6
Data
Bits
Reserved
SYS RSVD
5 6
Data Bits
1260 Infinity QuatPump VL User Manual
7 8
Parity
RSVD FC
7 8
Parity