Current Configuration Settings; Logout - D-Link xStack DGS-3600 User Manual

Current Configuration Settings

The Configuration Settings window allows users to manipulate configuration images saved in the Flash memory of the Switch.
To access the following window, click Save Services > Configuration Settings.
This window offers the following information:
Parameter
Configuration File Enter the configuration file located on the Flash drive to be altered.
Action This field has two options for configuration.
Click Apply to implement changes made.

Logout

Use the Logout page to logout of the Switch's Web-based management agent by clicking on the Log Out button.
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Figure 13- 5. Configuration Settings window
Description
Boot_up – Select this option to set the configuration file specified above as the boot
•
up configuration for the Switch. This saved configuration will be set as the boot up
file after a switch reboot has been performed. The default setting has configuration
file C:/STARTUP.CFG as the boot up configuration file for the Switch unless
specified here.
Active - Choosing this parameter will first load and then activate this configuration
•
file on the Switch.
Figure 13- 6. Logout Web Setup window
276