Table of Contents
Advertisement
GE Healthcare
REV 1
1.
OVERVIEW
D The Viewer window is displayed:
– when the Review Exam button in the Browser window is clicked after selection of a Patient,
examinations or series. The Viewer window opens and displays the first selected image.
– when the Start Exam button in the Worklist window is clicked after selection of a Patient in the
Worklist. The Viewer window opens, with the Medical Procedure Card displayed, ready to
display the acquired image.
The Viewer is used to display, manipulate, and analyze images that have been acquired using the
Digital Detector or recalled from the image disk for review.
2
3
4
D Most of the screen is used for the Viewing Area (1), in which images are displayed.
D At the left of the screen, there is a Command window, which includes three main sections:
– The Mosaic Image Browser (2).
– The Control Panel (3).
Two selection buttons at the top of the panel allow one of two different Control Panels (View
Control and Annotation) to be displayed, according to the functions required.
Functions available from the two panels are described in section 2.
– Function panel (4). Provides access to the Medical Procedure Card, image reprocessing,
image printing, Middle mouse button function selection, and exit from the Viewer.
D To leave the Viewer, click the (Close Exam) button
annotations are saved. If changes have been made to brightness or contrast settings, you are
asked to Exit with save, Exit without save, or Cancel.
All processed images in Medical Application preferences are in log format. To
NOTICE
make measurements on an image acquired in Medical Application preferences,
the raw image (which is in linear format) should be used.
CHAPTER 9 – VIEWER
Zoom
Senographe 2000 D Acquisition System
in the Function panel. All changes to
95
OM 5179217–1–100
1
Advertisement
Table of Contents
