GE Healthcare
REV 1
The scanner does not read a bar code symbol:
D Be sure the scanning system is programmed to read the type of bar code you are trying to scan.
Refer to section § 3-1-2 "Set default configuration".
D Be sure the bar code symbol is not defaced.
D The scan head must touch and cover every bar and space on the symbol as shown in Figure 5 – .
You can tilt the scanner forward or backward. Practice will quickly show you the ranges to work
within.
Right
Figure 5 – Scan the entire symbol
93
Senographe 2000 D Acquisition System
Wrong
OM 5179217–1–100