Table of Contents
Advertisement
GE Healthcare
REV 1
5. Configure the keyboard emulation model setting.
6. Enter code 719 to support the AWS QWERTY keyboard.
7. Set the keyboard to CAP LOCK OFF mode after symbol transmittal.
8. End Settings. You will hear 2 beeps.
Refer to the scanner documentation for more details on how to setup the scanner.
How to enter an AWS text field
3-1-3
1. Click to set the AWS keyboard focus in the text field you want to enter.
2. Scan the bar code symbol as described in section § 3-1-1. The decoded text is displayed in the
text field just as if you typed it using the keyboard.
What If ...
3-1-4
Nothing happens when you follow the operating instructions:
D Check the system power.
D Check for loose cable connections.
The AWS workstation goes back to monitor ok prompt:
Resetting or disconnecting/reconnecting the bar code scanner may make the workstation return to the
AWS monitor ok prompt. In this case
D type the go command to return to the normal working mode.
Senographe 2000 D Acquisition System
92
OM 5179217–1–100
Advertisement
Table of Contents
