GE Senographe 2000 D Operator's Manual page 81

GE Healthcare
REV 1
Test Hosts
Use this screen to test remote host connections. Select the host(s) to be tested in the three windows
(Remote Workstations, Remote Printers, and Remote HIS/RIS servers), and click the Test selected
hosts ... button to start the test. A message is displayed to indicate whether the test was successful or
the host could not be reached.
Auto Push Auto Print
Select remote hosts you want to test :
Remote Workstations :
Save
Names
Use this screen to enter and store the names of Operators
physicians. The stored names may then be recalled from the database when required, avoiding the
need for retyping each time a Medical Procedure Card is created or updated.
Auto Push Auto Print
Define or modify names in database :
Operators
Operator 1
Operator 2
Save
medAppPrefs
Annotations Auto Windowing Quality Check
Remote Printers :
Test selected hosts ...
medAppPrefs
Annotations Auto Windowing Quality Check
Performing physicians
Performing Physicians 1
Senographe 2000 D Acquisition System
Auto Delete Test Hosts
Remote HIS/RIS servers :
Performing physicians
,
Auto Delete Test Hosts
Referring physicians
Referring Physician 1
Referring Physician 2
79
OM 5179217–1–100
Names Image process
Close
and Referring
,
Names Image process
add
modify
delete
Close