Table of Contents
Advertisement
GE Healthcare
REV 1
2.
BROWSER RESTART
If it is necessary to restart (reset) the Browser, proceed as follows:
– Place the cursor in the title bar at the top of the Browser window.
– Use the left mouse button to drag the window down, leaving a blank space on the screen
above the window.
– Place the cursor in the blank space; click the right button.
– Select (Restart Browser) from the drop-down menu.
Restart Browser
Network queue (non empty)
Restart Browser
OK
3.
SYSTEM SHUTDOWN
D To shut down the Senographe 2000 D system, click on the Power off icon at the
lower right of the Browser window. Power is removed from the Senographe 2000
D Gantry and Generator; the AWS system follows a shutdown procedure lasting
about two minutes, designed to ensure that no information is lost.
4.
LOCK SCREEN
D This function may be used, for example, to prevent others from using the system
when a Physicist is carrying out tests and must leave them temporarily
unfinished.
D To lock the browser screen in its current state, preventing others from using it,
click the Lock screen icon at the top right of the screen.
D To unlock the screen, press the Return key, then enter the password when
requested (refer to the start up procedure given in Chapter 6).
If Network, Printing, or Save operations are in progress, a warning
box is displayed, allowing you to proceed with the restart or to
cancel it; the jobs in progress are interrupted and may be lost when
the Browser is restarted. Network transfers are stopped, but are
automatically retried after the restart. Printing and save operations
Cancel
are stopped, and must be launched again after the restart. Note
that interrupted save operations to a CD-R may result in a partially
saved file on the disk; the disk will be unuseable and must be
replaced before the operation is repeated.
Senographe 2000 D Acquisition System
66
OM 5179217–1–100
Advertisement
Table of Contents
