Table of Contents
Advertisement
GE Healthcare
REV 1
3-1
Annotation Level
System annotations are displayed automatically. They show exam-related information such as patient
name, patient ID, kV and mAs used, etc. The user can add further annotations (see Graphics &
Meas.).
Full
Partial
None
Custom
Custom Annotations window:
Annotations
1 : Patient information
2 : Acquisition date and time
3 : Hospital information
4 : X Ray parameters
5 : Anatomical information
6 : Processing information
7 : Display parameters
8 : Measurements
OK
D A small square button is displayed next to each group. To select the annotation groups that you
want displayed, click on the corresponding button. To deselect a group, click on the square a
second time.
D Click on (OK) to use the selected annotations, or on (Cancel) to cancel the operation.
3-2
Graphics & Meas.
These buttons allow you to add graphic and text annotations to the image, and perform
measurements.
You can add several graphic annotations (line segments and ellipses) on the same image. Each
annotation is identified by a number, which is displayed next to it. The corresponding measurements,
with the same identification number, are displayed in the bottom right corner of the image.
Only the three most recent measurements are displayed. To recall an earlier measurement value on
the screen, click on the corresponding line segment or ellipse.
D To select which annotations are displayed, click on the desired button
on the control panel.:
(Full): All annotations are displayed.
(Partial): A predefined subset of annotations is displayed. This facility
is not available when viewing SCPT images.
(None): No annotation is displayed on the image.
(Custom): This button opens the Custom window (shown below)
with the list of available annotation groups. This facility is not available
when viewing SCPT images
Patient name, first name, patient ID, date of birth
Exam date, exam type
Hospital/Unit name, name of performing physician
kV, mAs, track, filter, focal spot, exposure mode, compressive force,
thickness, ESE, AGD,
Laterality, Mag. factor
Incidence
Brightness, contrast, zoom factor
Annotation associated with measurements
Cancel
Senographe 2000 D Acquisition System
100
OM 5179217–1–100
Advertisement
Table of Contents
