Table of Contents
Advertisement
GE Healthcare
REV 1
D The new image has the chosen default Quality Check value (OK, or NOT OK). This can be
changed at any time while viewing the image (raw or processed), by clicking on the Quality Check
icon in the View Control panel; the new value is applied to both the raw and processed images.
Refer to section 4-5 in Chapter 9.
D Processing of the image is started automatically. See below for a discussion of processing
considerations.
D The processed image replaces the raw image within a few seconds; it is displayed with a standard
contrast level, but the user can choose a higher or lower contrast level using the View Control
contrast setting (see Chapter 9 "Viewer"). After changing contrast select (Auto) to display the
image with the new setting.
D As soon as an image has been transferred and displayed on the screen, the system is ready for
the next exposure. The images (first raw, then processed) from the new exposure replace the
previous image in the Viewer.
Senographe 2000 D Acquisition System
120
OM 5179217–1–100
Advertisement
Table of Contents
