Intermessage Delay - Honeywell N431X User Manual

Intermessage Delay

An intermessage delay of up to 5000 milliseconds (in 5ms increments)
may be placed between each scan transmission. Scan the following Inter-
message Delay bar code, then scan the number of 5ms delays, and the
Save bar code using the Programming Chart inside the back cover of this
manual.
1st Scan Transmission 2nd Scan Transmission
Intermessage Delay
Intermessage Delay
To remove this delay, scan the Intermessage Delay bar code, then set
the number of delays to 0. Scan the Save bar code using the
Programming Chart inside the back cover of this manual.
4 - 9