Ean-13 Beginning With 2 Addenda Required - Honeywell N431X User Manual

EAN/JAN-13 Addenda
This selection adds 2 or 5 digits to the end of all scanned EAN/JAN-
13 data. Default = Off for both 2 Digit and 5 Digit Addenda.
2 Digit Addenda On
5 Digit Addenda On
EAN/JAN-13 Addenda Required
When Required is scanned, the engine will only read EAN/JAN-13
bar codes that have addenda. Default = Not Required.
Required

EAN-13 Beginning with 2 Addenda Required

This setting programs
EAN-13 bar codes that begin with a "2." The following settings can be pro-
grammed:
Require 2 Digit Addenda: All EAN-13 bar codes that begin with a "2"
must have a 2 digit addendum. The EAN-13 bar code with the 2 digit
addendum is then transmitted as a single, concatenated bar code. If a 2
digit addendum is not found within the
EAN-13 bar code is discarded.
Note: if you are using
(page 6-46), that setting will take precedence over this one.
the engine to require a
EAN-13 Beginning with 290 Addenda Required
* 2 Digit Addenda Off
* 5 Digit Addenda Off
* Not Required
2 digit addenda only on
Addenda Timeout period, the
6-45