Table of Contents
Advertisement
the bar code below, then setting the timeout (from 0-65535 milliseconds)
by scanning digits from the
Default = 100.
Note: The Addenda Timeout setting is applied to all addenda and coupon
code searches.
UPC-E0
UPC-E0 On/Off
Most U.P.C. bar codes lead with the 0 number system. To read these
codes, use the UPC-E0 On selection. If you need to read codes that lead
with the 1 number system, use
* UPC-E0 On
UPC-E0 Expand
UPC-E Expand expands the UPC-E code to the 12 digit, UPC-A format.
Default = Off.
6-40
Addenda Timeout
<Default All UPC-E0 Settings>
On
Programming
Chart, then scanning Save.
EAN/JAN-13
(page 6-44). Default = On.
UPC-E0 Off
* Off
Advertisement
Table of Contents
