Table of Contents
Advertisement
Wincor Nixdorf Terminal Default Settings
Scan the following Plug and Play code to program the engine for a Wincor
Nix-dorf terminal. This bar code sets the baud rate to 9600 bps and the data
format to 8 data bits, no parity, 1 stop bit.
Note: If you are having unexpected results with this programming code, scan
the
Activate Defaults
programming code above.
Wincor Nixdorf Beetle™
Terminal Default Settings
Scan the following Plug and Play code to program the engine for a Wincor
Nix-dorf Beetle terminal. The following prefixes are programmed for each
symbol-ogy:
Symbology
Code 128
Code 93
Codabar
UPC-A
UPC-E
EAN-8
Note: If you are having unexpected results with this programming code, scan
the
Activate Defaults
programming code above.
Wincor Nixdorf Terminal Settings
bar code on page 1-5 first, then scan the
Prefix
K
L
N
A0
C
B
Wincor Nixdorf Beetle Settings
bar code on page 1-5 first, then scan the
Symbology
EAN-13
GS1-128
Interleaved 2 of 5
Plessey
Straight 2 of 5 IATA
All other bar codes
Prefix
A
P
I
O
H
M
2 - 9
Advertisement
Table of Contents
