Intermessage Delay - Honeywell HH1800 User Manual

the transmission of each control character in the message string. Scan the Interfunction Delay
barcode below, then scan the number of 5ms delays, and the Save barcode from the
Programming Chart,
To remove this delay, scan the Interfunction Delay barcode, then set the number of delays to
0. Scan the Save barcode from the

Intermessage Delay

An intermessage delay of up to 5000 milliseconds (in 5ms increments) may be placed
between each scan transmission. Scan the Intermessage Delay barcode below, then scan the
number of 5ms delays, and the Save barcode from the
211.
To remove this delay, scan the Intermessage Delay barcode, then set the number of delays to
0. Scan the Save barcode from the
58
beginning on page 211.
Prefix Scanned Data
STX 1 HT 2 3 4 5
Interfunction Delays
Interfunction Delay
Programming Chart,
1st Scan Transmission
Intermessage Delay
Intermessage Delay
Programming Chart,
Suffix
CR LF
beginning on page 211.
Programming Chart,
2nd Scan Transmission
beginning on page 211.
beginning on page
HH1800 User Guide