Table of Contents
Advertisement
Code 128
<Default All Code 128 Settings>
Code 128 On/Off
* On
Off
128 Group Separator Output
If you wish to convert FNC1 characters into group separator
characters "GS" (0x1D hex) with your Code 128 bar code output, scan
the On bar code. When Off is scanned, the group separator is not
output. Default =Off.
On
* Off
Code 128 Redundancy
If you are encountering errors when reading Code 128 bar codes, you may
want to adjust the redundancy count. Redundancy adjusts the number of
times a bar code is decoded before transmission, which may reduce the
number of errors. Note that the higher the redundancy count, the longer it will
take to decode the bar code. To adjust the redundancy, scan the Code
6-23
Advertisement
Table of Contents
