Table of Contents
Advertisement
GS1 DataBar Expanded
< Default All GS1 DataBar Expanded Settings >
GS1 DataBar Expanded On/Off
* On
Off
GS1 DataBar Expanded Redundancy
If you are encountering errors when reading GS1 DataBar Expanded bar
codes, you may want to adjust the redundancy count. Redundancy
adjusts the number of times a bar code is decoded before transmission,
which may reduce the number of errors. Note that the higher the
redundancy count, the longer it will take to decode the bar code. To adjust
the redundancy, scan the GS1 DataBar Expanded Redundancy bar
code below, then scan a redundancy count between 0 and 10 on the
Programming Chart
inside the back cover of this manual. Then scan the
Save
bar code. Default = 0.
GS1 DataBar Expanded
Redundancy
6-63
Advertisement
Table of Contents
