Code 93 - Honeywell N431X User Manual

Code 93

Code 93 On/Off
* On
Code 93 Redundancy
If you are encountering errors when reading Code 93 bar codes, you may
want to adjust the redundancy count. Redundancy adjusts the number of
times a bar code is decoded before transmission, which may reduce the
number of errors. Note that the higher the redundancy count, the longer it
will take to decode the bar code. To adjust the redundancy, scan the
Code 93 Redundancy bar code below, then scan a redundancy count
between 0 and 10 on the
manual. Then scan the
6-14
< Default All Code 93 Settings >
Programming Chart
Save bar code. Default = 0.
Code 93 Redundancy
Off
inside the back cover of this