Table of Contents
Advertisement
GS1 DataBar Omnidirectional
< Default All GS1 DataBar Omnidirectional Settings >
GS1 DataBar Omnidirectional On/Off
* On
Off
GS1 DataBar
Omnidirectional
Redundancy
If you are encountering errors when reading GS1 DataBar
Omnidirectional bar codes, you may want to adjust the redundancy count.
Redundancy adjusts the number of times a bar code is decoded before
transmission, which may reduce the number of errors. Note that the
higher the redun-dancy count, the longer it will take to decode the bar
code. To adjust the redundancy, scan the GS1 DataBar Omnidirectional
Redundancy bar code below, then scan a redundancy count between 0
and 10 on the
Programming Chart
inside the back cover of this manual.
Then scan the
Save
bar code. Default = 0.
GS1 DataBar Omnidirectional
Redundancy
6-61
Advertisement
Table of Contents
