Interfunction Delay - Honeywell N431X User Manual

Next, scan the Character to Trigger Delay bar code, then the 2-digit
hex value for the ASCII character that will trigger the delay
Conversion Chart
Delay Length
To remove this delay, scan
number of delays to 0. Scan the
Chart inside the back cover of this manual.

Interfunction Delay

An interfunction delay of up to 5000 milliseconds (in 5ms increments) may
be placed between the transmission of each segment of the message
string. Scan the following Interfunction Delay bar code, then scan the
number of 5ms delays, and the
Chart inside the back cover of this manual.
To remove this delay, scan the Interfunction Delay bar code, then set
the number of delays to 0. Scan the
Programming Chart
4 - 8
on page A-3.
the Delay Length bar code, and set the
Save
Prefix Scanned Data
STX 1 HT
Interfunction Delays
Interfunction Delay
inside the back cover of this manual.
Character to Trigger Delay
Save bar code using the
bar code using the
Suffix
2 3 4 5 CR
Save bar code using the
ASCII
Programming
Programming
LF