Table of Contents
Advertisement
GS1 Emulation
The engine can automatically format the output from any GS1 data carrier to
emulate what would be encoded in an equivalent GS1-128 or GS1 DataBar
symbol. GS1 data carriers include UPC-A and UPC-E,
EAN-13 and EAN-8,
ITF-14, GS1-128, and GS1-128 DataBar and GS1 Composites. (Any applica-
tion that accepts GS1 data can be simplified since it only needs to recognize
one data carrier type.)
If GS1-128 Emulation is
scanned, all retail codes (U.P.C.,
UPC-E, EAN8,
EAN13) are expanded out to 16 digits. If the AIM ID is enabled, the value will
be the GS1-128 AIM ID, ]C1 (see
Symbology Charts
on page A-1).
If GS1 DataBar Emulation is scanned, all retail codes (U.P.C., UPC-E, EAN8,
EAN13) are expanded out to 16 digits. If the AIM ID is enabled, the value will
be the GS1-DataBar AIM ID, ]em (see
Symbology Charts
on page A-1).
If GS1 Code Expansion Off is scanned, retail code expansion is disabled,
and UPC-E expansion is controlled by the
UPC-E0 Expand
(page 6-40)
setting. If the AIM ID is enabled, the value will be the GS1-128 AIM ID, ]C1
(see
Symbology Charts
on page A-1).
If EAN8 to EAN13 Conversion is scanned, all EAN8 bar codes are
converted to EAN13 format.
Default = GS1 Emulation Off.
GS1-128 Emulation
GS1 DataBar Emulation
GS1 Code Expansion Off
EAN8 to EAN13 Conversion
* GS1 Emulation Off
Postal Codes
The following lists linear postal codes. Any combination of linear postal code
selections can be active at a time.
6-65
Advertisement
Table of Contents
