Intermessage Delay - Honeywell Granit XP 199 i Series User Manual

To remove this delay, scan the Interfunction Delay barcode, then set the number
of delays to 0. Scan the Save barcode from the
page 291.

Intermessage Delay

An intermessage delay of up to 5000 milliseconds (in 5ms increments) may be
placed between each scan transmission. Scan the Intermessage Delay barcode
below, then scan the number of 5ms delays, and the Save barcode from the
Programming Chart,
To remove this delay, scan the Intermessage Delay barcode, then set the number
of delays to 0. Scan the Save barcode from the
page 291.
120
beginning on page 291.
1st Scan Transmission
Intermessage Delay
Intermessage Delay
Programming Chart,
2nd Scan Transmission
Programming Chart,
Granit XP User Guide
beginning on
beginning on