3
Input/Output Settings
Power Up Beeper
The engine can be programmed to beep when it's powered up. If you are
using a cordless system, the base can also be programmed to beep when it is
pow-ered up. Scan the Off bar code(s) if you don't want a power up beep.
Default = Power Up Beeper On - Engine.
Power Up Beeper Off -
Engine
* Power Up Beeper On -
Engine
Beep on BEL Character
You may wish to force the engine to beep upon a command sent from the host. If
you scan the following Beep on BEL On bar code, the engine will beep every time
a BEL character is received from the host. Default = Beep on BEL Off.
*Beep on BEL Off
Beep on BEL On
3 - 1