Table of Contents
Advertisement
Message Length Description
You are able to set the valid reading length of some of the bar code symbolo-
gies. If the data length of the scanned bar code doesn't match the valid read-
ing length, the engine will issue an error tone. You may wish to set the same
value for minimum and maximum length to force the engine to read fixed
length bar code data. This helps reduce the chances of a misread.
EXAMPLE: Decode only those bar codes with a count of 9-20 characters.
Min. length = 09Max. length = 20
EXAMPLE: Decode only those bar codes with a count of 15 characters.
Min. length = 15Max. length = 15
For a value other than the minimum and maximum message length defaults, scan
the bar codes included in the explanation of the symbology, then scan the digit
value of the message length and
the back cover of this manual. The minimum and maximum lengths and the
defaults are included with the respective symbologies.
6 - 2
Save
bar codes on the
Programming Chart
inside
Advertisement
Table of Contents
