Table of Contents
Advertisement
UPC-E0 Number System and Check Digit
UPC-E0 sample showing the number system and check digit:
Number
System
UPC-E0 Number System
The numeric system digit of a UPC-A symbol is normally transmitted
at the beginning of scanned data. When using UPC-E Expand, the
unit can be programmed so it will not transmit it. Default = On.
UPC-E0 Check Digit
Check Digit specifies whether the check digit should be transmitted
at the end of the scanned data or not. Default = Off.
* On
On
Check
Digit
Off
* Off
6-41
Advertisement
Table of Contents
