Table of Contents
Advertisement
Test Menu
When you scan the Test Menu On code, then scan a programming code in this
manual, the engine displays the content of a programming code. The program-
ming function will still occur, but in addition, the content of that programming
code is output to the terminal.
Note: This feature should not be used during normal engine operation.
On
EZConfig-Scanning Introduction
EZConfig-Scanning provides a wide range of PC-based programming functions
that can be performed on a engine connected to your PC's COM port. EZCon-fig-
Scanning allows you to download upgrades to the engine's firmware, change
programmed parameters, and create and print programming bar codes. Using
EZConfig-Scanning, you can even save/open the programming parameters for a
engine. This saved file can be e-mailed or, if required, you can create a single bar
code that contains all the customized programming parameters and mail or fax that
bar code to any location. Users in other locations can scan the bar code to load in
the customized programming.
To communicate with a engine, EZConfig-Scanning requires that the PC have
at least one available serial communication port, or a serial port emulation
using a physical USB port. If you are using the serial port and RS232 cable, an
exter-nal power supply is required. When using a USB serial port emulation,
only a USB cable is required.
EZConfig-Scanning Operations
The EZConfig-Scanning software performs the following operations:
Scan Data
Scan Data allows you to scan bar codes and display the bar code
data in a window. Scan Data lets you send serial commands to the
engine and receive engine response that can be seen in the Scan
Data win-dow. The data displayed in the Scan Data window can
either be saved in a file or printed.
Configure
Configure displays the programming and configuration data of the
engine. The engine's programming and configuration data is grouped
into different categories. Each category is displayed as a tree item
8 - 2
* Off
Advertisement
Table of Contents
