Table of Contents
Advertisement
under the "Configure" tree node in the application explorer. When
one of these tree nodes is clicked, the right-hand side is loaded with
the parameters' form belonging to that particular category. The
Configure tree option has all the programming and configuration
parameters specified for a engine. You can set or modify these
parameters
the engine, or save them to a dcf file.
Installing EZConfig-Scanning from the Web
Note: EZConfig-Scanning requires .NET framework. If .NET is not
installed on your PC, you will be prompted to install it during
the EZConfig-Scanning installation.
1.
Access the Honeywell web site at
2.
Click on the Downloads tab. Select Software.
3.
Click on the dropdown for Select Product Number and select the
number of your product.
4.
Click on the listing for EZConfig-Scanning.
5.
Follow the security directions as prompted on the screen.
6.
When prompted, select Save, and save the file to the c:\windows\
temp directory.
7.
Once you have finished downloading the file, exit the web site.
8.
Using Explorer, go to the c:\windows\temp file.
9.
Double click on the EZConfig-Scanning Setup.exe file. Follow the
screen prompts to install the EZConfig-Scanning program.
10.If you've selected the defaults during installation, you can click on
Start Menu-All Programs-Honeywell-EZConfig-Scanning.
as
required. You can later write the modified settings to
www.honeywellaidc.com
8 - 3
Advertisement
Table of Contents
