Table of Contents
Advertisement
No Read
With No Read turned On, the engine notifies you if a code cannot be read. If
using an EZConfig-Scanning Tool Scan Data Window (see page 8-2), an
"NR" appears when a code cannot be read. If No Read is turned Off, the "NR"
will not appear. Default = Off.
On
* Off
If you want a different notation than "NR," for example, "Error," or "Bad Code,"
you can edit the output message (see
Data Formatting
beginning on page 5-
1). The hex code for the No Read symbol is 9C.
3-22
Advertisement
Table of Contents
