Scan Transmit Partial Sequence to transmit partial sequences. (Any fields in
the sequence where no data match occurred will be skipped in the
output.) If you have programmed a
Sequence Timeout
(page 3-20) and the
timeout is reached, the partial sequence is transmitted. Default = Dis-
card Partial Sequence.
Transmit Partial Sequence
* Discard Partial Sequence
Require Output Sequence
When an output sequence is Required, all output data must conform to
an edited sequence or the engine will not transmit the output data to the
host device. When it's On/Not Required, the engine will attempt to get
the out-put data to conform to an edited sequence but, if it cannot, the
engine transmits all output data to the host device as is.
When the output sequence is Off, the bar code data is output to the host
as the engine decodes it. Default = Off.
Required
On/Not Required
*Off
3-21