No Read; Video Reverse - Honeywell Granit XP 199 i Series User Manual

No Read

With No Read turned On, the scanner notifies you if a code cannot be read. If using
an EZConfig-Scanning Tool Scan Data Window (see page 227), an "NR" appears
when a code cannot be read. If No Read is turned Off, the "NR" will not appear.
Default = Off.
If you want a different notation than "NR," for example, "Error," or "Bad Code," you
can edit the output message (see
code for the No Read symbol is 9C.

Video Reverse

Video Reverse is used to allow the scanner to read barcodes that are inverted. The
Video Reverse Off barcode below is an example of this type of barcode. Scan
Video Reverse Only to read only inverted barcodes. Scan Video Reverse and Stan-
dard Barcodes to read both types of codes.
Note: After scanning Video Reverse Only, menu barcodes cannot be read. You must scan
Video Reverse Off or Video Reverse and Standard Barcodes in order to read menu
barcodes.
Note: Images downloaded from the unit are not reversed. This is a setting for decoding only.
Granit XP User Guide
On
Video Reverse Only
Data Format beginning on page 121). The hex
* Off
Video Reverse and Standard
Barcodes
113