Decode Timeout; Dpm Support; Show No Read; Output Sequence - Honeywell HF800 Series Reference Manual

Decode Timeout

This sets the maximum time duration that the reader used to decode each image.

DPM Support

This setting can enable or disable the support of DPM code.

Show No Read

When enable this setting, if the reader failed to decode, it will output a string "NR" to
notify the user.
This parameter can only work in External Trigger mode or Self-Trigger mode.

Output Sequence

Output Sequence Overview

This programming selection allows you to program the reader to output data (when
scanning more than one symbol) in whatever order your application requires,
regardless of the order in which the bar codes are scanned.
To apply for the output sequence matching, user can edit the matching rule before
execute it. The reader can support to add the following items into the matching
sequence.
1, Code ID
This can designate the specific symblogy type which we want to apply the output
sequence format.
2, Length
Specify what length (up to 9999 characters) of data output will be acceptable for this
symbology.9999 is an universal number, indicating all lengths.
When calculating the length, you must count any programmed prefixes, suffixes, or
formatted characters as part of the length (unless using 9999).
3, Character Match Sequences
Specify the first character(s) you want to match.
99 is the Universal number, indicating all characters.
In the "Decoding" tab page, click the button can add one item.
Click the button can remove one item from the list.
67