Download Table of Contents Print this page

Honeywell 8600 Quick Start Manual

Ring scanner


Quick Links

8600 Ring Scanner

Quick Start Guide

Aller à
Vai a
Gehe zu
Ir a
Para Português, acesse
Перейти на русскоязычный сайт
Pro češtinu jdi na
Pre slovenčinu choď na
Türkçe için lütfen
Idź na stronę :
如要到中国简体) 。
para español.
pour le français.
per l'italiano.
für Deutsch.
sayfasını ziyaret ediniz.
po quick start w języku polskim.
8600-QS Rev A



Related Manuals for Honeywell 8600

Summary of Contents for Honeywell 8600

  • Page 1: Quick Start Guide

    8600 Ring Scanner Quick Start Guide Aller à pour le français. Vai a per l'italiano. Gehe zu für Deutsch. Ir a para español. Para Português, acesse Перейти на русскоязычный сайт Pro češtinu jdi na
  • Page 2: Laser Scanner

    Laser Scanner. 1. Scan Window 2. Trigger 3. Ring Strap 4. Connector (connect to sled) Laser Imager 1. Illumination LEDs 2. Scan Window 3. Trigger 4. Ring Strap 5. Connector (connect to sled)
  • Page 3: Trigger Rotation

    Trigger Rotation Scanner head can be rotated 180° Left Hand Right Hand Connect Scanner to Arm Mount Sled Slide the ring scanner cable connector into the bottom of the sled until the connector ring clicks shut.
  • Page 4: Attach Ring To Finger

    Attach Ring to Finger Step 2 - Step 1 - Slide Pull ring finger into strap to loosened ring secure strap ring to Remove finger Shipping Film The ring cable should not cross under the hand.
  • Page 5: How To Scan A Bar Code

    How to Scan a Bar Code Scan Beam Type DANGER Ring Imager Correct Ring Scanner LASER DO NOT STARE DIRECTLY Incorrect INTO THE LASER BEAM 2D Bar Code Linear Bar Code Bar Code Type Wrist Position When Scanning Incorrect Wrist Position Incorrect Wrist Position Correct Wrist...
  • Page 6 Remove Ring Strap Module Step 1 - Turn 90°. Step 2 - Press latch down. Step 3 - Remove the ring strap module.
  • Page 7 Replace Ring Strap Module Step 1 - Connect ring latch with trigger catch. Step 2 - Press together until a click occurs. Step 3 - Turn 90°. Step 4 - Ready to scan.
  • Page 8 Remove Trigger Step 3 - Lift the trigger up. Step 1 - Remove the ring strap module. Turn the trigger until a black screw is visible. Remove the Step 2 - Turn the screw. trigger 180°. Replace Trigger Step 3 - Insert and tighten the black screw.
  • Page 9: Technical Assistance

    For patent information, please refer to Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made.