Gs1 Databar Expanded; Trioptic Code - Honeywell Xenon 1910 User Manual

GS1 DataBar Expanded

GS1 DataBar Expanded On/Off
* On
GS1 DataBar Expanded Message Length
Scan the bar codes below to change the message length. Refer to
information. Minimum and Maximum lengths = 4-74. Minimum Default = 4, Maximum Default = 74.
Minimum Message Length

Trioptic Code

Note: If you are going to scan Code 32 Pharmaceutical codes
Trioptic Code is used for labeling magnetic storage media.
On
8 - 32
< Default All GS1 DataBar Expanded Settings >
Message Length Description
(page 8-5), Trioptic Code must be off.
Off
(page 8-1) for additional
Maximum Message Length
* Off