Stamp High Pixel Threshold Csr - Basler L800k User Manual

Configuring the Camera

Stamp High Pixel Threshold CSR

Register Base Address: 0x2B40
Field Name: Register Status
Description: The integer value in this field indicates the status of this control register:
Field Name: High Pixel Threshold
Description: Writing an integer value to this field sets the high pixel threshold for the stamp feature.
Field Name: Min
Description: Minimum allowed integer value for the high pixel threshold. This field is updated to reflect
Field Name: Max
Description: Maximum allowed integer value for the high pixel threshold. This field is updated to reflect
Field Name: Increment
Description: An integer value indicating the increment for the high pixel threshold setting.
4-38
0x00 = The register is not available
0x01 = The register is available. All related settings are OK
0x80 = A value in the register is set out of range
When the camera is set for 8 bit output, you should set the high pixel threshold within a
range from 0 (0x0000) to 255 (0x00FF).
When the camera is set for 10 bit output, you should set the high pixel threshold within a
range from 0 (0x0000) to 1023 (0x03FF).
The 2 bytes in this field are interpreted as follows:
Byte 1 = Low byte of the high pixel threshold
Byte 2 = High byte of the high pixel threshold
See Section 3.8 for more information about the stamp feature and the high pixel threshold.
limitations caused by the way any related features are set.
The 2 bytes in this field are interpreted as follows:
Byte 1 = Low byte of the min value
Byte 2 = High byte of the min value
limitations caused by the way any related features are set.
The 2 bytes in this field are interpreted as follows:
Byte 1 = Low byte of the max value
Byte 2 = High byte of the max value
The 2 bytes in this field are interpreted as follows:
Byte 1 = Low byte of the max value
Byte 2 = High byte of the max value
Draft
Offset: 0x0000
Offset: 0x0001
Offset: 0x0003
Offset: 0x0005
Offset: 0x0007
Size: 1 Byte Type: Read only
Size: 2 Bytes Type: Read / Write
Size: 2 Bytes Type: Read only
Size: 2 Bytes Type: Read only
Size: 2 Bytes Type: Read only
BASLER L800
k