Two-Line Averaging Csr - Basler L800k User Manual

Two-line Averaging CSR

Register Base Address: 0x1C00
Field Name: Register Status
Description: The integer value in this field indicates the status of this control register:
Field Name: Mode
Description: Writing an integer value to this field sets the two-line averaging mode:
BASLER L800
k
0x00 = The register is not available
0x01 = The register is available. All related settings are OK
0x80 = A value in the register is set out of range
0x00 = Two-line averaging disabled
0x01 = Two-line averaging enabled
See Section 3.9.4 for more information about two-line averaging.
Draft
Offset: 0x0000
Offset: 0x0001
Configuring the Camera
Size: 1 Byte Type: Read only
Size: 1 Byte Type: Read / Write
4-41