Setting The Gain Balance - Basler L800k User Manual

Operation and Features

3.6.2.1 Setting the Gain Balance

You can set the gain balance with the Camera Configuration Tool Plus (CCT+) or by using binary
write commands from within your own application to set the camera's control and status registers
(CSRs).
With the CCT+
With the CCT+ (see Section 4.1), you use the Left/Right Gain Balance, the Left Odd/Even Gain
Balance and the Right Odd/Even Gain Balance parameters in the Gain & Offset parameters group
to set the gain balance.
By Setting CSRs
You set the left/right gain balance by writing a value to the Absolute L/R Gain Balance field or to
the Raw L/R Gain Balance field of the Left/Right Gain Balance CSR (see page 4-20).
You set the left odd/even gain balance by writing a value to the Absolute L O/E Gain Balance field
or to the Raw L O/E Gain Balance field of the Left Odd/Even Gain Balance CSR (see page 4-22).
You set the right odd/even gain balance by writing a value to the Absolute R O/E Gain Balance
field or to the Raw R O/E Gain Balance field of the Right Odd/Even Gain Balance CSR (see page
4-24).
Section 4.2.2
field in a CSR. Section
3-14
explains CSRs and the difference between using the "absolute" field and the "raw"
4.3.1 explains using read/write commands.
Draft
BASLER L800
k