Dark Noise Cancellation Mode Csr; Defective Pixel Correction Mode Csr - Basler L800k User Manual

Configuring the Camera

Dark Noise Cancellation Mode CSR

Register Base Address: 0x1480
Field Name: Register Status
Description: The integer value in this field indicates the status of this control register:
Field Name: Mode
Description: Writing an integer value to this field sets the dark noise cancellation mode:

Defective Pixel Correction Mode CSR

Register Base Address: 0x3100
Field Name: Register Status
Description: The integer value in this field indicates the status of this control register:
Field Name: Mode
Description: Writing an integer value to this field sets the pixel correction mode:
4-40
0x00 = The register is not available
0x01 = The register is available. All related settings are OK
0x80 = A value in the register is set out of range
0x00 = Dark noise cancellation disabled
0x01 = Dark noise cancellation enabled
Note: In edge-controlled mode, dark noise cancellation has no effect on the image.
See Section 3.9.2 for more information about dark noise cancellation.
0x00 = The register is not available
0x01 = The register is available. All related settings are OK
0x80 = A value in the register is set out of range
0x00 = Defective pixel correction off
0x01 = Defective pixel correction enabled
See Section 3.9.3 for more information about the defective pixel correction feature.
Draft
Offset: 0x0000
Offset: 0x0001
Offset: 0x0000
Offset: 0x0001
Size: 1 Byte Type: Read only
Size: 1 Byte Type: Read / Write
Size: 1 Byte Type: Read only
Size: 1 Byte Type: Read / Write
BASLER L800
k