Introduction; Document Applicability - Basler L800k User Manual

1 Introduction

1.1 Document Applicability

This User's Manual applies to L800
Cameras with a lower or a higher ID number may have fewer features or have more features than
described in this manual. Features on cameras with a lower or a higher ID number may not
operate exactly as described in this manual.
An easy way to see the camera version ID number for an L800
see the camera version ID number:
1. Double click the CCT+ icon on your desktop or click Start
Technologies
to your camera.
2. Scroll down until you find the
"Camera Information" group
heading. If there is a plus sign
beside
Information group heading,
click on the plus sign to show
the list of parameters in the
group.
3. Find the parameter called
"Camera Version." As shown
in Figure 1-1, the last two
numbers of this parameter are
the camera
number.
You can also access the camera version ID number by using binary commands to
read the Camera Version Inquiry register. (See Section
inquiry registers and Section
BASLER L800
k
Draft
cameras with a camera version ID number of 05.
k
⇒ ⇒
CCT+ CCT+. The CCT+ window will open and the software will connect
the Camera
version ID
Figure 1-1: CCT+ Window
camera is by using the CCT+. To
k
⇒
4.3 for information on using binary commands.
Introduction
⇒
All Programs Basler Vision
This is the
camera
version
4.2.1 for an explanation of
ID
1-1