Stamp Low Pixel Limit Csr - Basler L800k User Manual

Stamp Low Pixel Limit CSR

Register Base Address: 0x2B20
Field Name: Register Status
Description: The integer value in this field indicates the status of this control register:
Field Name: Low Pixel Limit
Description: Writing an integer value to this field sets the low pixel limit for the stamp feature.
Field Name: Min
Description: Minimum allowed integer value for the low pixel limit. This field is updated to reflect limita-
Field Name: Max
Description: Maximum allowed integer value for the low pixel limit. This field is updated to reflect limita-
Field Name: Increment
Description: An integer value indicating the increment for the low pixel limit setting.
BASLER L800
k
0x00 = The register is not available
0x01 = The register is available. All related settings are OK
0x80 = A value in the register is set out of range
When the camera is set for 8 bit output, you should set the low pixel limit within a range
from 0 (0x0000) to 255 (0x00FF).
When the camera is set for 10 bit output, you should set the low pixel limit within a range
from 0 (0x0000) to 1023 (0x03FF).
The 2 bytes in this field are interpreted as follows:
Byte 1 = Low byte of the low pixel limit
Byte 2 = High byte of the low pixel limit
See Section 3.8 for more information about the stamp feature and the low pixel limit.
tions caused by the way any related features are set.
The 2 bytes in this field are interpreted as follows:
Byte 1 = Low byte of the min value
Byte 2 = High byte of the min value
tions caused by the way any related features are set.
The 2 bytes in this field are interpreted as follows:
Byte 1 = Low byte of the max value
Byte 2 = High byte of the max value
The 4 bytes in this field are interpreted as follows:
Byte 1 = Low byte of the max value
Byte 2 = High byte of the max value
Draft
Offset: 0x0000
Offset: 0x0001
Offset: 0x0003
Offset: 0x0005
Offset: 0x0007
Configuring the Camera
Size: 1 Byte Type: Read only
Size: 2 Bytes Type: Read / Write
Size: 2 Bytes Type: Read only
Size: 2 Bytes Type: Read only
Size: 2 Bytes Type: Read only
4-37