Line Rate - Basler L800k User Manual

Operation and Features
Figure 3-1: L800
For single and dual video data output mode the digitized pixel data is reordered in
the camera's FPGA so that the pixels will be transmitted from the camera in se-
quential order from pixel 1 through pixel 8160.
For dual separated video data output mode the pixel data is directly transmitted
from the camera without reordering. For details of the video data sequence see
section 2.5.5.3.

3.2 Line Rate

The camera's maximum achievable line rate depends on the following factors:
• Video data output mode (Section 3.3)
• Exposure time (Section 3.4)
• Use of two-line averaging (Section 3.9.4)
3-2
Draft
Sensor Architecture
k
BASLER L800
k