Roll Over Protection System (Rops) Replacement - Toro TITAN Max Service Manual

Fuel Tank Installation (continued)

Roll Over Protection System (ROPS) Replacement

Roll Over Protection System (ROPS) Removal
Chassis: Service and Repairs
g336088
1. Vent Hose Assembly
2. Fuel Supply Line
4. Install the seat onto the machine.
5. Install the left and right consoles.
Console Installation (page 5–18)
6. Open the fuel supply valve.
g344221
7. Connect the battery by installing the positive cable first, then the negative
cable to the battery.
1. Park the machine on a level surface and disengage the PTO. Stop the engine,
wait for all moving parts to stop, and remove key. Engage the parking brake.
2. Disconnect the battery by removing the negative cable first, then the positive
cable from the battery.
3. Fold the ROPS assembly into the upright position and lock in place.
Figure 49
3. Fuel Shut-Off Valve
Seat Installation (page 5–20)
Left Console Installation (page 5–15) Right
Figure 50
Page 5–24 TITAN® Max Service Manual
3442-428 Rev A