Belt Tensioner Removal (continued)
Mower Deck: Service and Repairs
3. Remove the deck drive belt from the mower deck.
4.
Remove the (3/8-16 inch) nut securing the idler pulley to the idler arm.
g344577
5. Remove the idler belt guide, washer, idler pulley, idler bushing, and screw
(0.375-16 x 2.5 inch) from the idler arm.
Note: Take note of the position of the belt guide next to the idler arm.
g344579
1.
Flange Nut
2.
Belt Guide
3.
Washer
4.
Flat Idler Pulley
6. Remove the (5/16-18 inch) flange nut and (3/8-16 x 1.750 inch) screw
securing the end of the idler arm to the mower deck.
Figure 92
Figure 93
5.
Idler Bushing
6.
Idler Arm
7.
Screw
Page 6–18
TITAN® Max Service Manual
3442-428 Rev A