Toro TITAN Max Service Manual page 91

Belt Tensioner Installation (continued)
TITAN® Max Service Manual
3442-428 Rev A
6. Install the (3/8-16 x 1.750 inch) screw and (5/16-18 inch) nut securing the
end of the idler arm to the mower deck. Torque the screw to 40.67 ± 4.067 N
• m (30 ± 3 ft-lb).
g344578
7. Verify the idler arm is installed in the correct orientation.
8. Install the deck drive belt onto the mower deck.
9. Install the LH belt cover onto the mower deck, secure with 4 (0.250-20 x
0.500 inch) screws. Repeat on the RH side of the
10. Install the mower deck onto the machine.
Figure 98
Mower Deck Installation (page 6–8)
Page 6–21 Mower Deck: Service and Repairs