Toro TITAN Max Service Manual page 68

Motion Control Assembly Removal (continued)
Motion Control Assembly Installation
Chassis: Service and Repairs
g336044
9. Lower the motion control assembly through the frame toward the center of
the machine, remove the assembly.
1. Raise and support the unit so that the front wheels are off the ground, block
rear wheels.
2. Position the motion control assembly in place with the linkage extending
toward the transmission.
3. Secure the motion control assembly to the frame.
g336044
4. Connect the motion control linkage to the transmission.
Figure 61
Figure 62
Page 5–32 TITAN® Max Service Manual
3442-428 Rev A