Seat Replacement - Toro TITAN Max Service Manual

Right Console Installation (continued)

Seat Replacement

Seat Removal
TITAN® Max Service Manual
3442-428 Rev A
6. Connect the battery by installing the positive cable first, then the negative
cable to the battery.
1. Park the machine on a level surface and disengage the PTO. Stop the engine,
wait for all moving parts to stop, and remove key. Engage the parking brake.
2. Disconnect the battery by removing the negative cable first, then the positive
cable from the battery.
3. Slide the seat forward.
4. Remove the 2 (5/16-18 inch) nuts and 2 (0.312-18 x 1.000 inch) carriage
screws securing the seat plate to the chassis.
g344224
1. Nut
5. Tip the seat forward, remove the 2 wire retainers from the bottom of the
seat and seat plate.
Figure 40
2. Carriage Screw
Page 5–19 Chassis: Service and Repairs