Toro TITAN Max Service Manual page 48

Caster Wheel Disassembly (continued)
Caster Wheel Assembly
Chassis: Service and Repairs
g342890
8. Inspect the bearings for wear or damage and replace if necessary.
1. Ensure that the wheel is clean and free of debris or excessive wear.
2. Using a (1 1/6 inch) socket and hammer, install the 2 bearings into the caster
wheel.
g342921
3. Install the caster wheel spanner into the caster wheel.
4. Install the 2 seal guards and washers onto the caster wheel hubs.
Figure 26
Figure 27
Page 5–12 TITAN® Max Service Manual
3442-428 Rev A