Toro TITAN Max Service Manual page 54

Right Console Installation
Chassis: Service and Repairs
1. Lower the console into place, while moving the control panel assembly
through the opening in the console and into position. Verify the console
seats properly on the supports.
Note: Before securing the control panel to the console, ensure that all cables
and electrical connections are seated firmly in place on the underside of
the control panel assembly.
g344218
2. Secure the control panel assembly to the console with a hex screw.
3. Install the (10–14 x 1/2 inch) plastic screw securing the control panel
assembly to the console.
4. Install the 2 (T25) screws securing the console to the console bracket on
the underside of the console.
5. Install the (T30) torx screw securing the RH console to the chassis.
g343007
Figure 38
Figure 39
Page 5–18 TITAN® Max Service Manual
3442-428 Rev A