Toro TITAN Max Service Manual page 82

Deck Drive Belt Removal (continued)
Deck Drive Belt Installation
Mower Deck: Service and Repairs
g344399
6. Remove the deck drive belt from the PTO clutch.
g344400
7. Remove the 4 (0.250-20 x 0.500 inch) screws securing the LH belt cover to
the mower deck. Remove the LH belt cover from the mower deck. Repeat on
the RH side of the machine.
8. Loosen the (3/8-16 inch) nut securing the idler pulley to the idler arm.
9. Remove the deck drive belt from the mower deck.
1. Route the deck drive belt around the mower pulleys.
2. Tighten the (3/8-16 inch) nut securing the idler pulley to the idler arm.
3. Install LH belt cover onto the mower deck and secure with 4 (0.250-20 x
0.500 inch) screws. Repeat on the RH side of the machine.
4. Install the deck drive belt to the PTO clutch.
Figure 80
Figure 81
Page 6–12 TITAN® Max Service Manual
3442-428 Rev A