Toro TITAN Max Service Manual page 85

Mower Spindle Removal (continued)
Mower Spindle Installation
TITAN® Max Service Manual
3442-428 Rev A
7. From the topside of the mower deck, remove the (0.750-16 inch) spindle lock
nut and washer securing the each spindle shaft to the drive blade sheaves.
g344425
8. Remove each drive blade sheave and spindle shaft from the mower deck.
9. Remove the bearing shields.
10. Remove and discard the 6 (5.16-18 x 7/8 inch) taptite screws securing
spindle assemblies to the mower deck.
g344426
11. Remove the spindle assemblies from the mower deck.
12. Using a hammer and a punch, remove the 2 bearings and spacers from
each spindle assembly.
1. Using a (32 mm) socket and a hammer, install the top bearings into the
spindles.
Figure 86
Figure 87
Page 6–15 Mower Deck: Service and Repairs