Belt Tensioner Replacement - Toro TITAN Max Service Manual

Mower Spindle Installation (continued)

Belt Tensioner Replacement

Belt Tensioner Removal
TITAN® Max Service Manual
3442-428 Rev A
g344425
9. Raise and support the mower deck.
10. From the underside of the mower deck, install the blade screw and washer
securing each mower blade to the mower deck. Torque the screw to
135.58–149 N • m (100–110 ft-lb).
g344424
11. Lower the mower deck to the ground to access the topside of the mower deck.
12. Install the deck drive belt onto the mower deck.
13. Install the LH drive belt cover to the mower deck, secure with 4 (0.250-20 x
0.500 inch) screws. Repeat on the RH side of the machine.
14. Install the mower deck onto the machine.
1. Remove the mower deck.
2. Remove the 4 (0.250-20 x 0.500 inch) screws securing the LH belt cover to
the mower deck. Repeat on the RH side of the mower deck.
Figure 90
Figure 91
Mower Deck Installation (page 6–8)
Mower Deck Removal (page 6–5)
Page 6–17 Mower Deck: Service and Repairs